exa  E  7018100000000000000♠1000000000000000000  10 
peta  P  7015100000000000000♠1000000000000000  10 
tera  T  7012100000000000000♠1000000000000  10 
giga  G  7009100000000000000♠1000000000  10 
mega  M  7006100000000000000♠1000000  10 
kilo  k  7003100000000000000♠1000  10 
hecto  h  100  10 
deca  da  10  10 
(none)  (none)  1  10 
deci  d  0.1  10 
centi  c  0.01  10 
milli  m  0.001  10 
micro  μ  6994100000000000000♠0.000001  10 
nano  n  6991100000000000000♠0.000000001  10 
pico  p  6988100000000000000♠0.000000000001  10 
femto  f  6985100000000000000♠0.000000000000001  10 
atto  a  6982100000000000000♠0.000000000000000001  10 
A metric prefix is a unit prefix that precedes a basic unit of measure to indicate a multiple or fraction of the unit. While all metric prefixes in common use today are decadic, historically there have been a number of binary metric prefixes as well. Each prefix has a unique symbol that is prepended to the unit symbol. The prefix kilo, for example, may be added to gram to indicate multiplication by one thousand: one kilogram is equal to one thousand grams. The prefix milli, likewise, may be added to metre to indicate division by one thousand; one millimetre is equal to one thousandth of a metre.
Decimal multiplicative prefixes have been a feature of all forms of the metric system, with six dating back to the system's introduction in the 1790s. Metric prefixes have even been prepended to nonmetric units. The SI prefixes are standardized for use in the International System of Units (SI) by the International Bureau of Weights and Measures (BIPM) in resolutions dating from 1960 to 1991. Since 2009, they have formed part of the International System of Quantities.
List of SI prefixes
The BIPM specifies twenty prefixes for the International System of Units (SI).

 ^ Prefixes adopted before 1960 already existed before SI. 1873 was the introduction of the CGS system.
Each prefix name has a symbol that is used in combination with the symbols for units of measure. For example, the symbol for kilo is 'k', and is used to produce 'km', 'kg', and 'kW', which are the SI symbols for kilometre, kilogram, and kilowatt, respectively. Where Greek letters are unavailable, the symbol for micro 'µ' is commonly replaced by 'u'.
Prefixes corresponding to an integer power of one thousand are generally preferred. Hence 100 m is preferred over 1 hm (hectometre) or 10 dam (decametres). The prefixes hecto, deca, deci, and centi are commonly used for everyday purposes, and the centimetre (cm) is especially common. However, some modern building codes require that the millimetre be used in preference to the centimetre, because "use of centimetres leads to extensive usage of decimal points and confusion".
Prefixes may not be used in combination. This also applies to mass, for which the SI base unit (kilogram) already contains a prefix. For example, milligram (mg) is used instead of microkilogram (µkg).
In the arithmetic of measurements having units, the units are treated as multiplicative factors to values. If they have prefixes, all but one of the prefixes must be expanded to their numeric multiplier, except when combining values with identical units. Hence,
 6997500000000000000♠5 mV × 6997500000000000000♠5 mA = 6997500000000000000♠5×10 V × 6997500000000000000♠5×10 A = 6995249999999999999♠25×10 V·A = 6995249999999999999♠25 μW
 6997500000000000000♠5.00 mV + 6995099999999999999♠10 μV = 6997500000000000000♠5.00 mV + 6995100000000000000♠0.01 mV = 6997501000000000000♠5.01 mV
When units occur in exponentiation, for example, in square and cubic forms, the multiplication prefix must be considered part of the unit, and thus included in the exponentiation.
 1 km means one square kilometre, or the area of a square of 7003100000000000000♠1000 m by 7003100000000000000♠1000 m and not 7003100000000000000♠1000 square metres.
 2 Mm means two cubic megametres, or the volume of two cubes of 7006100000000000000♠1000000 m by 7006100000000000000♠1000000 m by 7006100000000000000♠1000000 m or 7018200000000000000♠2×10 m, and not 7006200000000000000♠2000000 cubic metres (7006200000000000000♠2×10 m).
 6998500000000000000♠5 cm = 6998500000000000000♠5×10 m = 5 × 0.01 m = 0.05 m
 7006900000000000000♠9 km = 9 × (10 m) = 9 × (10) × m = 7006900000000000000♠9×10 m = 9 × 7006100000000000000♠1000000 m = 7006900000000000000♠9000000 m
 3 MW = 7006300000000000000♠3×10 W = 3 × 7006100000000000000♠1000000 W = 7006300000000000000♠3000000 W
Application to units of measurement
The use of prefixes can be traced back to the introduction of the metric system in the 1790s, long before the 1960 introduction of the SI. The prefixes, including those introduced after 1960, are used with any metric unit, whether officially included in the SI or not (e.g., millidynes and milligauss). Metric prefixes may also be used with nonmetric units.
The choice of prefixes with a given unit is usually dictated by convenience of use. Unit prefixes for amounts that are much larger or smaller than those actually encountered are seldom used.
Metric units
Mass
In use, the kilogram, gram, milligram, microgram, and smaller are fairly common. However, megagram (and gigagram, teragram, etc.) are rarely used; tonnes (and kilotonnes, megatonnes, etc – although these units generally are not used as a measure of mass per se, but rather TNT energy equivalent of a mass) or scientific notation are used instead. Megagram is occasionally used to disambiguate the metric tonne from the various nonmetric tons. An exception is pollution emission rates, which are typically on the order of Tg/yr. Sometimes, only one element or compound is denoted for an emission, such as Tg C/yr or Tg N/yr.
Alone among SI units, the base unit of mass, the kilogram, already includes a prefix. The prefixes consequently do not indicate corresponding multipliers of the base unit in the case of mass; for example, a megagram is 7003100000000000000♠1×10 kg, whereas mega indicates a multiplier of 7006100000000000000♠10.
Volume
The litre (equal to a cubic decimetre), millilitre (equal to a cubic centimetre), microlitre, and smaller are common. In Europe, the centilitre is often used for packaged products (such as wine) and the decilitre less frequently. (The latter two items include prefixes corresponding to an exponent that is not divisible by three.)
Larger volumes are usually denoted in kilolitres, megalitres or gigalitres, or else in cubic metres (1 cubic metre = 1 kilolitre) or cubic kilometres (1 cubic kilometre = 1 teralitre). For scientific purposes, the cubic metre is usually used.
Length
The kilometre, metre, centimetre, millimetre, and smaller are common. (However, the decimetre is rarely used.) The micrometre is often referred to by the nonSI term micron. In some fields, such as chemistry, the ångström (equal to 0.1 nm) historically competed with the nanometre. The femtometre, used mainly in particle physics, is sometimes called a fermi. For large scales, megametre, gigametre, and larger are rarely used. Instead, nonmetric units are used, such as astronomical units, light years, and parsecs; the astronomical unit is mentioned in the SI standards as an accepted nonSI unit.
Time and angles
The second, millisecond, microsecond, and shorter are common. The kilosecond and megasecond also have some use, though for these and longer times one usually uses either scientific notation or minutes, hours, and so on.
Official policies about the use of these prefixes vary slightly between the Bureau International des Poids et Mesures (BIPM) and the American National Institute of Standards and Technology (NIST); and some of the policies of both bodies are at variance with everyday practice. For instance, the NIST advises that "to avoid confusion, prefix symbols (and prefixes) are not used with the timerelated unit symbols (names) min (minute), h (hour), d (day); nor with the anglerelated symbols (names) ° (degree), ′ (minute), and ″ (second)."
The BIPM’s position on the use of SI prefixes with units of time larger than the second is the same as that of the NIST, but their position with regard to angles differs: they state "However astronomers use milliarcsecond, which they denote mas, and microarcsecond, µas, which they use as units for measuring very small angles." The SI unit of angle is the radian, but, as mentioned above, degrees, minutes and seconds see some scientific use.
Temperature
Official policy also varies from common practice for the degree Celsius (°C). NIST states: "Prefix symbols may be used with the unit symbol °C and prefixes may be used with the unit name 'degree Celsius'. For example, 12 m°C (12 millidegrees Celsius) is acceptable." In practice, it is more common for prefixes to be used with the kelvin when it is desirable to denote extremely large or small absolute temperatures or temperature differences. Thus, temperatures of star interiors may be given in units of MK (megakelvins), and molecular cooling may be described in mK (millikelvins).
Energy
In use the joule and kilojoule are common, with larger multiples seen in limited contexts. In addition, the kilowatt hour, a composite unit formed from the kilowatt and hour, is often used for electrical energy; other multiples can be formed by modifying the prefix of watt (e.g. terawatt hour).
There exist a number of definitions for the nonSI unit, the calorie. There are gram calories and kilogram calories. One kilogram calorie, which equals one thousand gram calories, often appears capitalized and without a prefix (i.e. 'Cal') when referring to "dietary calories" in food. It is common to apply metric prefixes to the gram calorie, but not to the kilogram calorie: thus, 1 kcal = 1000 cal = 1 Cal.
Nonmetric units
Metric prefixes are widely used outside the system of metric units. Common examples include the megabyte and the decibel. Metric prefixes rarely appear with imperial or US units except in some special cases (e.g., microinch, kilofoot, kilopound or 'kip'). They are also used with other specialized units used in particular fields (e.g., megaelectronvolt, gigaparsec, millibarn). They are also occasionally used with currency units (e.g., gigadollar), mainly by people who are familiar with the prefixes from scientific usage. In geology and paleontology, the year, with symbol a (from the Latin annus), is commonly used with metric prefixes: ka, Ma, and Ga.
Presentation
Pronunciation
When an SI prefix is affixed to a root word, the prefix carries the stress, while the root drops its stress but retains a full vowel in the syllable that is stressed when the root word stands alone. For example, kilobyte is /ˈkɪlɒbaɪt/, with stress on the first syllable. However, words in common use outside the scientific community may follow idiosyncratic stress rules. In English speaking countries, kilometre is often pronounced /kɪˈlɒmɪtər/, with reduced vowels on both syllables of metre.
The prefix giga is usually pronounced in English as /ˈɡɪɡə/, with hard〈g〉as in "get", but sometimes /ˈdʒɪɡə/, with soft〈g〉as in "gin".
Typesetting
The LaTeX typesetting system features an SIunitx package in which the units of measurement are spelled out, for example, \SI{3}{\tera\hertz}
formats as "3 THz".
Nonstandard prefixes
Obsolete metric prefixes
Some of the prefixes formerly used in the metric system have fallen into disuse and were not adopted into the SI. The decimal prefix myria (sometimes also written as myrio) (ten thousand) as well as the binary prefixes double and demi, denoting a factor of 2 and 1/2 (one half), respectively, were parts of the original metric system adopted by France in 1795. These were not retained when the SI prefixes were internationally adopted by the 11th CGPM conference in 1960.
Other metric prefixes used historically include hebdo (10) and micri (10).
Double prefixes
Double prefixes have been used in the past, such as micromillimetres or "millimicrons" (now nanometres), micromicrofarads (now picofarads), kilomegatons (now gigatons), hectokilometres (now 100 kilometres) and the derived adjective hectokilometric (typically used for qualifying the fuel consumption measures). These were disallowed with the introduction of the SI.
Other obsolete double prefixes included "decimilli" (10), which was contracted to "dimi" and standardized in France up to 1961.
"Hella" prefix proposal
In 2010, UC Davis student Austin Sendek started a petition to designate "hella" as the SI prefix for one octillion (10). The petition gathered over 60,000 supporters by circulating through Facebook and receiving a significant amount of media coverage. Although the Consultative Committee for Units considered the proposal, it was rejected. However, hella has been adopted by certain websites, such as Google Calculator and Wolfram Alpha.
X, W and V
Brian C. Lacki follows Z and Y with the adopted prefixes X, W and V to mean 7027100000000000000♠10, 7030100000000000000♠10 and 7033099999999999999♠10 respectively, thus continuing the inverse alphabetical order.
Similar symbols and abbreviations
In written English, the symbol K is often used informally to indicate a multiple of thousand in many contexts. For example, one may talk of a 40K salary (40000), or call the Year 2000 problem the Y2K problem. In these cases, an uppercase K is often used with an implied unit (although it could then be confused with the symbol for the kelvin temperature unit if the context is unclear). This informal postfix is read or spoken as "thousand" or "grand", or just "k", but never "kilo" (despite that being the origin of the letter).
The financial and general news media mostly use m/M, b/B and t/T as abbreviations for million, billion (10) and trillion (10) for large quantities, typically currency and population.
The medical and automotive fields in the United States use the abbreviations "cc" or "ccm" for cubic centimetres. 1 cubic centimetre is equivalent to 1 millilitre.
For nearly a century, the electrical construction industry used the abbreviation "MCM" to designate a "thousand circular mils" in specifying thicknesses of large electrical cables. Since the mid1990s, "kcmil" has been adopted as the "official" designation of a thousand circular mils, but the designation "MCM" still remains in wide use. A similar system is used in natural gas sales in the United States: m (or M) for thousands and mm (or MM) for millions of British thermal units or therms, and in the oil industry, where 'MMbbl' is the symbol for 'millions of barrels'. This usage of the capital letter M for 'thousand' is from Roman numerals, in which M means 1,000.
Binary prefixes
In some fields of information technology, it has been common to designate nondecimal multiples based on powers of 1024, rather than 1000, for some SI prefixes (kilo, mega, giga), contrary to the definitions in the International System of Units (SI). This practice has been sanctioned by some industry associations, including JEDEC. The International Electrotechnical Commission (IEC) standardized the system of binary prefixes (kibi, mebi, gibi, etc.) for this purpose.
See also
Notes
 ^ The names and symbols of the binary prefixes proposed by the IEC include etc.
References
External links
Authority: International System of Units (BIPM)
